JellyVR
Jelly Pucks V2
Jelly Pucks V2
Couldn't load pickup availability
Made and shipped from the EU, no customs fees, fast and cheap delivery.
✅ Compact power bank for full-body VR tracking
✅ For HTC VIVE trackers (1.0, 2.0, and 3.0)
✅ 14-20 hours playtime, 2000mAh battery
✅ USB-C pass-through charging supported
✅ On/off toggle button for manual power control
✅ Side LEDs show battery level
✅ Revives trackers with dead charging ports
✅ Fully custom designed hardware
🎉🍜💡 Friends of UdonVR and Rhythm!
✴️ Important:
• Pucks sold individually
• Track straps not included
• HTC VIVE trackers not included
🚚 Delivery:
Orders are dispatched once per week. Fully tracked international shipping, tracking number and updates sent via email.
📦 Included with Each Puck:
• Jelly Puck
• 4mm hex key
• Packaging
Specifications
🧪 Testing:
Each puck is tested for connectivity, and each batch is tested for charge cycle capacity.
📟 Technical Specifications:
| Specification | Value |
|---|---|
| Input | 5V 2.1A (USB-C) |
| Output | 5V 2.4A (vive tracker draws <500mA) |
| Playtime | 14-20 hours (depending on tracker ver/health) |
| Battery | 2 x 3.7V 1000mAh (with protection circuits) |
| Total Capacity | ~6500mWh |
| Charge Time | ~1.2 hours |
📐 Measurements:
| Measurement | Value |
|---|---|
| Bolt / Insert | 1/4″-20 UNC (standard camera screw) |
| Device Size | 62mm × 62mm × 14mm (20mm with bolt) |
| Device Weight | 70g |
| Packaged Weight | 85g |
Downloads
🧊 3D Models:
Jelly Puck V2 3MF/STL Files: Download (ZIP 2.9mb)
The above files are provided under Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International
🖨️ Print Settings:
Filaments: PETG*
Nozzle: 0.4mm
Layer Height: 0.2mm
Infill: 25%
Wall Loops: 6
Top Layers: 5
Bottom Layers: 3
* Use black, white, and clear filament (clear for light pipes)
